Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Kent?
Garage door service in Kent, WA typically costs $150 – $600 for a repair, while a complete new door installation runs $700 – $2200 depending on size, material, and whether a new opener is part of the job. Spring repair is the most common call we handle in Kent, at an estimated $180 – $340 for one spring. The written estimate sets the final price, and estimates are free.
We’re a garage door specialist, so the numbers on this page are all we work with every day. Our technicians have up to 15 years of experience, and they’re factory-familiar with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, which means faster diagnosis and the right parts the first time. When the door won’t move and you need it back on track today, call (855) 475-0589.
Key takeaways:
- Most garage door repairs in Kent land between $150 and $600.
- One spring is estimated at $180 – $340. A matched pair is usually replaced together, so a pair runs about twice that.
- New door installation is estimated at $700 – $2200.
- Opener repair is $120 – $320; new opener installation is $250 – $550.
- The written estimate sets the final price. No surprises after the fact.
Garage Door Cost Breakdown (2026)
Here’s how the numbers break down by job type for the Kent market. These are typical estimated ranges for 2026, not a final quote. Your door’s size, age, and condition, plus the parts needed, decide where in the range you land.
| Service | Typical Estimated Cost |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
One number worth repeating: a spring price covers one spring. Most doors run two, and they wear at the same rate, so a matched pair is usually swapped at the same time. A pair costs about twice the single-spring range. Replacing one and leaving the other is often a false economy, because the second spring is usually close behind. We’ll tell you honestly which route makes sense for your door.
What pushes a job toward the top of the range? A heavy or oversized door, a torsion system versus extension springs, a snapped cable that also knocked the track out of line, and any opener that needs replacement rather than repair. What keeps it low? A single worn roller, a misaligned track, a sensor that just needs adjusting. The right fix, not the easy fix, is how we approach it. A door that only needs a $110 – $220 roller swap shouldn’t turn into a replacement quote.
When you call (855) 475-0589, we ask about the door and the symptom, then give you a clear picture before anyone comes out. Free estimates, upfront pricing, and a satisfaction guarantee on the work.
What Affects Garage Door Pricing in Kent?
Kent homes range from older East Hill properties with wood doors to newer builds in Panther Lake and the Kent Valley with steel and composite doors. That mix shapes what jobs cost here. Here’s what moves the number most.
- Door material and size. A single-car steel door sits near the bottom of the $700 – $2200 installation range. A double-car wood or insulated door with windows pushes toward the top. Material cost and weight both climb with the size of the opening.
- Spring type. Torsion springs (mounted on a shaft above the door) and extension springs (running along the sides) cost different amounts to replace and require different handling. Both fall within the $180 – $340 per-spring estimate, but the layout affects labor.
- Opener brand and age. A LiftMaster or Chamberlain unit with a failing logic board is usually a straightforward repair at $120 – $320. An older opener where parts are hard to source can tilt toward replacement at $250 – $550. We work on all eight major brands, so the brand on your ceiling doesn’t slow us down.
- Kent’s wet winters. The Puget Sound lowlands get steady rain from fall through spring, and that moisture finds every gap. Steel panels rust at the bottom edge, wood doors soak up damp, and rollers and hinges stiffen when they’re wet. We see more roller and track complaints in Kent after a stretch of wet weather, and a $110 – $220 roller replacement often solves what feels like a bigger problem.
- Whether the damage is isolated or connected. A single dented panel is $250 – $500 to swap. A bent track plus a snapped cable plus a door that came off its rollers is a bigger repair, even though each piece looks small on its own.
- Emergency timing. A door that won’t close leaves the house open. Emergency garage door service is available because that’s a security problem, not a “schedule it for next week” problem. Emergency work can carry a premium over a standard appointment, and we’ll tell you upfront where the number lands.
We cover the full service lifecycle under one roof: repair, opener repair, spring repair, and complete new installation. You don’t need a second provider when one job turns into two. If you want a broader look at the services we offer, start with Renton Garage Door Repair Co.
How to Save on Garage Door Service in Kent
The biggest lever on cost is catching a small problem before it becomes a big one. A worn roller that costs $110 – $220 to replace today can wear the track and strain the opener if it’s ignored for a season. Moisture is the other thing worth watching here, given how much rain Kent gets.
- Fix the small stuff early. A door that squeaks, jerks, or slows near the top is telling you something. Diagnosing it early keeps the job in the $150 – $600 repair range instead of drifting into replacement territory.
- Lubricate moving parts a couple of times a year. Hinges, rollers, and the spring shaft benefit from a proper garage door lubricant, especially before the wet season. This is a safe task for a homeowner and costs almost nothing.
- Clear the bottom of the door. Leaves, grit, and standing water at the threshold wear the bottom seal and let damp creep into the panel edges. A quick sweep keeps the door sealing properly.
- Repair, don’t replace, when the door has life left in it. A new door is $700 – $2200. A spring, cable, or roller repair done well keeps a sound door running for years. We’ll tell you when a repair makes sense and when it doesn’t, honestly.
- Get a written estimate before the work starts. Free estimates mean you know the number before anyone touches the door. Call (855) 475-0589 and we’ll talk through what your door needs.
- Keep the opener healthy. A well-adjusted opener doesn’t strain the springs or the door. If your opener is struggling, an opener repair at $120 – $320 now can head off a spring or cable failure later.
FAQs – Garage Door Costs in Kent
How much does garage door repair cost in Kent?
Garage door repair in Kent typically costs $150 – $600. The final number depends on what’s failing and how much of the system is involved. A roller or track job sits near the bottom; a repair that pulls in springs or cables moves toward the top. Call (855) 475-0589 for an exact quote, and estimates are free.
How much does a new garage door cost in Kent?
A new garage door installation in Kent is estimated at $700 – $2200. Material (steel, wood, composite), door size, and insulation level drive where you land in that range. If you also need a new opener, that’s an additional $250 – $550. Call (855) 475-0589 to talk through options, and we’ll give you a written estimate.
Is it cheaper to repair a garage door or replace it?
Repair is almost always cheaper when the door itself is sound. A spring or cable repair at $130 – $340 costs a fraction of a new door at $700 – $2200. Replacement makes more sense when the panels are rusted through, the door is badly dented or warped, or repeated repairs are adding up. We’ll give you a straight answer about which route is right for your door, and the estimate is free.
How much does garage door spring repair cost in Kent?
Spring repair in Kent is estimated at $180 – $340 per spring. A matched pair is usually replaced together, so budget about twice that range if both springs are worn. Since springs wear evenly, replacing one and leaving the other is often short-lived. Our trained technicians handle both torsion and extension springs safely. Call (855) 475-0589 for a quote.
Can you come today if my garage door won’t open?
Emergency garage door service is available for doors that won’t move, because a stuck door creates a real access and security problem. Response timing depends on the day, so call (855) 475-0589 and we’ll find the earliest slot. We’re closed on Saturdays, and a door that fails on a Saturday can be booked for Sunday.
What’s the difference between repair and installation pricing?
Repair addresses a specific failing part, which is why it ranges from about $110 for rollers up to $600 for a larger repair. Installation replaces the whole door or the whole opener, so it starts higher: $250 – $550 for an opener and $700 – $2200 for a door. The written estimate sets the final price in both cases. Call (855) 475-0589 and we’ll help you sort which one you actually need.
A Word on Safety with Springs
Torsion and extension springs are under extreme tension. They’re the most dangerous part of the system and the most commonly botched DIY job on a garage door. A spring that lets go under load can cause serious injury, and the cables and bars that hold it aren’t meant to be handled without the right tools and training. Our technicians handle springs as trained professionals. If your door has a snapped spring, don’t try to force it open or reach for the hardware. Call us at (855) 475-0589 and we’ll take care of it safely.
Why Call a Garage Door Specialist in Kent?
We do one thing: garage doors. Not HVAC, not general contracting, not a side service bolted onto another trade. That single-trade focus means our technicians diagnose faster and know the difference between a fix that holds and one that masks a problem. A general handyman can adjust a track. A specialist knows when a track adjustment is hiding a worn roller, a weak spring, or a failing opener that will come back to bite you.
We’re factory-familiar with the eight brands you’re most likely to have in your Kent garage: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. If your door carries one of those names, you’re in familiar territory. Our technicians have up to 15 years of experience, and every job comes with a satisfaction guarantee. The local pros we connect you with are licensed and insured as their state requires.
If you’re weighing repair against a new door, or you just want to know what a job will cost before committing, call (855) 475-0589 for a free estimate. We’ll give you numbers you can act on and a clear recommendation. Fast dispatch from 7am to 7pm, same-day service when the part’s on hand, and a real person on the line when you need one.
Pricing reflects the Kent market as of 2026. Renton Garage Door Repair Co offers free estimates – call (855) 475-0589.
What Our Customers Say
"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Luis Herrera"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Alma Hernandez"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Michelle Yang