Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Renton?
Spring replacement in Renton typically costs $180 – $340 for a single torsion or extension spring, including the spring, labor and a balance check once it’s installed. A matched pair is almost always the smarter call on a double-wide door, and a pair runs about twice that range, roughly $360 – $680. Those are typical estimates for the Renton market in 2026; the written estimate we give you after we see the door is what sets the final price.
If you’re reading this because your door just slammed down and won’t lift, you already know the sound. That’s the classic snapped-spring moment, and it’s exactly the kind of call we handle as emergency garage door service when a stuck door leaves your car trapped or your house open. We’re a garage door specialist, so springs are a daily job here, not a sideline. Call (855) 475-0589 for a free estimate and we’ll get the door back on track today where the schedule allows.
Key takeaways
- One spring: typically $180 – $340. A matched pair: about $360 – $680.
- The spring is only part of a spring system – cables, drums and the opener all take load, and we check them together.
- Like-for-like replacement is the cheapest fix. Upgrading from extension to torsion springs costs more up front but usually lasts longer.
- Free estimates, upfront pricing, and a written quote before any work starts.
Spring Replacement Cost Breakdown (2026)
Here’s how the numbers come together on a typical Renton job. These are estimated ranges for the whole job – parts and labor – not a per-hour rate.
| Line item | Typical estimated range |
|---|---|
| Single torsion or extension spring replacement | $180 – $340 |
| Matched pair (both springs on a double-wide door) | $360 – $680 |
| Cable repair, if a cable is frayed or snapped alongside the spring | $130 – $250 |
| Track realignment, when the door has jumped or shifted | $120 – $240 |
| Roller replacement, common when a spring failure has stressed the hardware | $110 – $220 |
| Opener repair, if the opener was strained by the dead spring | $120 – $320 |
| General garage door repair, when several small issues stack up | $150 – $600 |
The spring itself is almost never the whole bill. When a torsion spring breaks on a Renton door, it releases the tension that’s been holding the whole assembly in balance. Cables can snap or jump their drums. The door can come down hard enough to bend a track or crack a roller. The opener, meanwhile, has been fighting a door it was never meant to lift alone. If the door ran the opener repeatedly against that weight before you noticed, the gear or the logic board may need attention too. We look at those parts on the same visit so the estimate covers the real scope, not just the spring.
What pushes the price toward the top of a range: heavier doors, high-lift or unusual track setups, a snapped pair rather than a single spring, and a job where the old springs are seized or the drums are worn. What keeps it lower: a standard single-car door with one spring, clean hardware, and no cable or opener damage. Either way, you get the number in writing first.
What Affects Spring Replacement Pricing in Renton
- Spring type. Torsion springs (the horizontal spring on the wall above the door) and extension springs (the ones that run along the tracks) cost differently to replace, and torsion is the more common setup on newer Renton builds. A torsion conversion costs more than a like-for-like swap but tends to outlast extension springs.
- One spring or two. A standard double-wide door carries a pair. If one has snapped, the other is usually near the end of its life too, so replacing both now usually costs less than paying twice for two separate visits.
- Door size and weight. A wide or insulated door needs a heavier spring rated for that weight. Heavier-rated springs cost more and take a bit more handling than a light single-car spring.
- Lift height and track layout. Standard seven-foot ceilings are straightforward. Higher ceilings, low-headroom setups and unusual track runs take more time and hardware, and that shows up in the estimate.
- Hardware condition. A spring that fails on a door with worn cables, rusty drums or flat rollers usually means more than the spring itself. We price those fixes in on the same quote so you’re not surprised later.
- Weather and use. Renton’s damp, mild-and-wet climate – wet autumns, wet winters, a lot of moisture in the air – puts steady wear on garage door hardware. Cold snaps tighten the metal and stress springs already near the end of their life, and it isn’t unusual for a spring to let go on the first genuinely cold morning of the season. If your door has a few winters on it in the Renton valley, it’s worth having the springs checked before one fails.
When to Fix the Spring Rather Than Replace the Door
Springs fail. Doors rarely need replacing just because a spring broke. If the panels, frame and track are straight and the door still runs true, replacing the spring is the right fix, not the easy fix. That’s a few hundred dollars against a whole new door, which typically runs $700 – $2200 to install. We won’t push a replacement when a spring and a cable will do it.
It’s a different conversation when a door is badly bent, structurally failing or so old that parts no longer fit it. In that case, the honest advice is that you’re putting money into a door that’s near the end of its road. We’ll tell you which side of that line you’re on – in plain terms, over the phone, before anyone rings your doorbell.
Do You Need to Replace Both Springs at Once?
Usually, yes. A matched pair is replaced together because both springs have lived the same life. They were installed at the same time, carried the same weight and taken the same wear. When one snaps, the other is nearly as old and almost certainly not far behind. Replacing one now and the second in a few months means paying two call-out costs, and it’s often the more expensive route in the end. That’s why we quote a pair around twice the single-spring range. On a single-spring door, of course, one spring is the whole job.
Can You Fix a Broken Spring the Same Day?
In most cases, yes. Spring replacement is a same-day job on standard doors when the parts we need match your door, and we’re set up for it. We’re familiar with the major spring setups on everything from older Genie-opened single doors to newer LiftMaster and Chamberlain systems with modern torsion hardware, and we work with doors from Clopay, Amarr, Wayne Dalton, Craftsman and Raynor too, so the diagnosis is quick and the right part is sourced without guesswork. If your door is stuck now, call (855) 475-0589 – a spring replacement is exactly the kind of emergency we take on.
How to Save on Spring Replacement
- Get a free estimate before agreeing to anything. Call (855) 475-0589 and we’ll give you a written number for the exact job, so you can compare like for like. The written estimate sets the final price.
- Replace the pair, not the single. It reads like more expensive up front, but a pair now usually beats two single jobs over a year or two.
- Fix small issues on the same visit. A frayed cable or worn roller replaced at the same time as the spring costs less than a separate trip later.
- Don’t force the door. Running an opener against a broken spring can chew up the opener and add an opener repair to the bill. Wait for the fix – that costs nothing.
- Have the springs checked before they fail. If your door is over ten winters old and starting to feel stiff or noisy, a spring check can catch the failure before it strands your car in the morning.
- Keep the door balanced and lubed. A door that runs smoothly takes less off the springs. Simple maintenance stretches the life of the hardware.
Is Spring Replacement a DIY Job?
No, and this is the part where we’d ask you not to try. A torsion spring is under extreme tension, and the wrong move can break a wrist or worse. Extension springs can snap loose with enough force to damage a car or a person. This is the garage door job the industry treats with the most caution – trained technicians, proper winding bars and the right technique. A spring replacement that goes wrong costs far more than the repair. We handle it by the numbers, with the door secured and the tension released properly, so the job is fixed once, safely.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Renton?
Typical estimates run $180 – $340 for a single spring and about $360 – $680 for a matched pair. The written estimate after we see your door sets the final price. Call (855) 475-0589 for a free quote – estimates are free.
Is it cheaper to repair or replace a garage door with a broken spring?
Repairing is almost always cheaper: a spring replacement runs a few hundred dollars, while a new door installation typically costs $700 – $2200. Replacement is only the smarter call when the door itself is bent or failing. Call (855) 475-0589 and we’ll tell you which you actually need.
Why do garage door springs break more in Renton’s wet, cold weather?
Renton’s damp climate and cold snaps are hard on springs. Moisture wears at the hardware over time, and a cold morning tightens the metal and stresses a spring that’s already near the end of its life. If your door is aging, it’s worth a spring check. Call (855) 475-0589.
Do I need to replace both springs if one breaks?
Usually, yes. A matched pair carries the door’s weight together, and when one fails the other is nearly the same age. A pair runs around twice the single-spring range, and replacing both now usually costs less than two separate visits later. Call (855) 475-0589 to price your setup.
Can you come today if my spring snaps and the door won’t move?
Same-day spring work is common on standard doors, and a dead door that leaves you locked in or open to the street is exactly what we prioritize. Call (855) 475-0589 for a free estimate and we’ll get it moving again.
Where Our Spring Work Fits Into the Rest of the Door
We’re a single-trade garage door specialist, so we see the whole door rather than one spring. That matters because spring failure is rarely the whole story – cables, openers and tracks all interact. If the door’s problem is more than the spring, our Renton garage door repair team covers the wider job, and for the full picture of what spring replacement involves, that page walks through the process from start to finish. When you call, we ask a few questions about the door and the symptom so we turn up with the right parts the first time. Our technicians have up to 15 years of experience across the brands we work with, and every job comes with a free estimate and a written price before work begins. If your door is down right now, call (855) 475-0589 and let’s get it back on track today.
Pricing reflects the Renton market as of 2026. Renton Garage Door Repair Co offers free estimates – call (855) 475-0589.
What Our Customers Say
"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Luis Herrera"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Alma Hernandez"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Michelle Yang